What’s the first thing that comes to your mind when you hear “bike”?
Riding a motorcycle and feeling that cool breeze is indeed a surreal feeling. Imagine riding a bike and the bike chain suddenly breaks down, sounds awful, doesn’t it?
That’s where service and maintenance of a bike comes into picture. A bike that is serviced at regular intervals of time provides you an optimum performance and a smooth experience while riding it.
There are numerous ways to ensure that your bike sustains longer, prominent amongst them is servicing your bike engine with a 4t motorcycle oil. Let’s dive into finding the best tips that help you increase the life of your motorcycle.
CONSEQUENCES OF NOT SERVICING YOUR TWO-WHEELER FREQUENTLY:
Not servicing your bike can cause an extreme wear and tear of your bike. Just like how humans need a proper nutrition to live a healthy life, a bike requires a proper oiling and greasing to ensure that it stays intact for a long period of time.
A two-wheeler, if not taken care of properly can be affected badly due to:
Rusting of parts
Clogging the filters
Increase in fuel consumption
Battery leakages
Jamming of clutch and brake pads
Lack of maintenance of a two wheeler can result into an extremely poor performance and will cost the efficiency of the bike. In some cases, rust builds up over the bike chains and parts if not taken care of properly, which leads to a decay in the chassis and bike parts.
5 TIPS TO ENSURE OPTIMUM HEALTH OF A BIKE:
To ensure that your bike must be efficient enough to sustain for a long period of time, there are certain practices that will help you immensely.
Warming up the engine plays a key role in ensuring that your engine is healthy and intact. Ideally warming up the engine for a good minutes will heat the engine up and give an amazing kick-start. This also helps in increasing the temperature of your two wheeler engine oil, thus resulting in a smoother overall transmission
Checking & Replacing Engine Oil
The most important step that helps you increase the life expectancy of your bike is checking your engine oil. A 4t engine oil for motorcycles is highly recommended, however you must check the manual to check the grade of two-wheeler oil that suits the engine. A two-wheeler engine oil that can boost the performance of your bike significantly if you take care of these steps:
Checking engine oil quality and level is a good practice before going for a bike ride
It is recommended to replace the engine oil every miles travelled.
Some bikes may have different engine oil replacement schedule, but it enhances the engine life if you replace the oil before the scheduled replacement period.
Grade of oil is different for different motorcycles. Ensure that you choose the one prescribed for your bike in the manual.
When it comes to selecting the right engine oil, one must consider its efficacy and a premium grade that provides you a subtle experience. Aurolube’s Click® 4T SAE 20w40 API – SN engine oil is a synthetic blend of 4T motorcycle oil developed with top-notch technology to boost the performance of your bike.
As important oiling the engine is, lubricating your bike and its parts enhances its performance massively. There’s a range of different parts which require lubrication at regular intervals.
Apart from your chains, wheel bearings, suspension have to be lubricated and greased to ensure that the bike runs smoothly.
Clean Engine Carburettor and Air Filter Regularly:
A carburettor can accumulate lots of stale oil and grease remnants that will massively affect the utility of a bike. It’s essential to clean the carburettor and maintain valve clearances thoroughly. It’s recommended to clean out the carburettor for every kilometres travelled.
Efficiency of a motor cycle is vastly affected if the air filter is clogged with impurities. A clogged air filter allows air filled with dirt to enter the motorcycle engine. If you continue riding with a clogged air filter, it prohibits the right blend of fuel and air, which comprehensively damages your engine.
Clutch adjustment and not over revving:
Over revving your bike might seem a cool thing to do, but it hampers the condition of the bike significantly. The engine gets overheated than usual, which might result in frequent stalling of engines.
In a similar way, a clutch should be regulated in such a way that it has a free play. Over-tightening the clutch can increase your fuel consumption and also can slip out unnoticed.
TUNE YOUR BIKE TO PERFECTION WITH THE BEST TWO WHEELER ENGINE OIL
La Ola de Desbloqueo
Esta semana, se espera que se desbloqueen criptomonedas con un valor combinado que supera los $ millones. Los proyectos que están en el centro de atención incluyen Dao Maker (DAO), STEPN (GMT), Internet Computer (ICP), BitMEX (BMEX), Aptos (APT) y The Sandbox (SAND). Estos datos han sido meticulosamente compilados por DropsTab. El desbloqueo de estas criptomonedas podría generar una notable presión de venta en el mercado.
Adentrándonos en los Detalles
Token DAO Maker: Este es el token de gobernanza para el ecosistema de DAO Maker, que opera sobre la cadena de bloques de Ethereum. Está programado un desbloqueo significativo de millones de DAO, que representa el % de su suministro total, para el 9 de agosto.
GMT: Este es el token nativo de la aplicación de estilo de vida WEB 3, STEPN, que integra elementos de «Social-Fi y Game-Fi». También está programado un desbloqueo de millones de GMT, que representa el % de su suministro total, para el 9 de agosto.
ICP: Sirviendo como el token de utilidad nativo para la cadena de bloques de capa-1 Internet Computer, ICP ayuda en la gobernanza de la red y recompensa a sus participantes. Está programado un desbloqueo de millones de ICP, que representa más del % de su suministro total, para el 11 de agosto.
BMEX: Este token de utilidad funcional está diseñado para el intercambio de criptomonedas, BitMEX. Se desbloquearán millones de BMEX, que representan el % de su suministro total, el 11 de agosto.
APT: Como el token nativo para la cadena de bloques de capa 1 Aptos, que utiliza el mecanismo de consenso de Prueba de Participación (PoS), APT se está preparando para un evento de desbloqueo el 12 de agosto. Esto implicará la liberación de millones de APT, alrededor del % de su suministro total.
SAND: Un token de utilidad ERC construido sobre la cadena de bloques de Ethereum, SAND se utiliza ampliamente dentro del ecosistema de The Sandbox. Un evento de desbloqueo el 14 de agosto verá la liberación de millones de SAND, lo que representa un asombroso % de su suministro total.
Una Opinión Personal sobre el Fenómeno del Desbloqueo
Desde mi punto de vista, el bloqueo de tokens, a menudo denominado período de bloqueo, es un intervalo crucial durante el cual los tokens están prohibidos para su negociación o liquidación. La duración de este período generalmente es dictada por la estrategia del equipo y puede abarcar varios años en algunos casos. La liberación de estos tokens de criptomonedas generalmente intensifica la presión de venta en los activos. Esta presión es el efecto acumulativo del volumen de tokens desbloqueados y su entrada en los intercambios de criptomonedas.
Eventos de desbloqueo pasados han mostrado una tendencia de disminución con la introducción de nuevos tokens en el mercado. Por ejemplo, APT experimentó una caída en su valor de más del 8% en el último mes. DAO y SAND siguieron el mismo camino con caídas de casi el 5% y un poco más del 4%, respectivamente. Otros tokens, GMT y BMEX, también experimentaron una disminución en sus precios del % y % en el último mes. Sin embargo, ICP logró destacarse con una disminución mínima del 1%.
En conclusión, aunque el desbloqueo de tokens es un evento regular en el mundo de las criptomonedas, su impacto en el mercado puede variar. Desde mi punto de vista, los inversores deben permanecer vigilantes e informados sobre tales eventos para tomar decisiones bien fundamentadas.